Order Form - IMI Industries

Requirements

Please enable JavaScript in your browser to complete this form.

Customer detail

Ref. No.

Customer Name *

Attention to *

Email *

Tel No. *

Product

Select Product *

T5500 Pressure Gauge #1

Volume

Product #1

Dial Size #1 *

Model #1 *

Wetted Parts Material #1 *

Case Filling #1 *

Process Connection #1 *

Connection Location #1 *

RANGE #1 *

Engineering Unit #1 *

Additional Options

Accuracy #1

AJ - Special accuracy 0,5 % grade 2A according to ASME B40.100 (Not for ranges < 1 bar (dry) or < 4 bar (liquid filled))

Agency Approval #1

ATEX - ATEX approval (see page 1) (only available with laminated safety glass)
EAC - Custom declaration according Eurasian Conformity (Not in combination with option ATEX)

Case Material #1

YW - Case and ring material stainless steel 316L

Case And Ring #1

BQ - Wall mounting bracket
FF - Front flange on bayonet ring (Not for dial size 160 mm)
FW - Wall mounting flange
FX - Front flange tack welded to case
UF - U-clamp for panel mounting (Not for model T6500)

Connection #1

TU - Throttle plug
WP - No throttle plug in dry or liquid filled cases

Liquid Filling #1

GQ - White oil
GR - Glycerine 99,5%
GV - Silicone
GX - Halocarbon
QC - Low temperature silicone for ambient temperature up to -70°C, includes Flourosilicone sealing (For 100 mm T6500 only)
LJ - Field fillable

Dial Optoins #1

AB - Absolute pressure
CS - Combination range / Dual scale
DN - Dial calibrated at angle other than vertical (Information is required by the customer)
E6 - Dial pin in 6 o ́clock position
ON - Without Ashcroft logo, neutral
PR - Receiver gauge (Information is required by the customer)
SS - Special Scale (Information is required by the customer)
6Y - Skydrol use

Movement #1

LL - PLUS!TM Performance (Not available with Halocarbon filling)
NZ - PLUS!TM Performance silicone free (Not for execution L (liquid filled))
OS - Overload range stop
VS - Underload range stop up to -1 bar
SM - Stainless steel 316L (1.4404) movement

Pointer #1

MP - Adjustable micrometer pointer

Window #1 *

Assembly #1

MO - Instrument assembled to accessory
MO1 - Instrument assembled to diaphragm seal

Cleaning #1

6B - Cleaned for gaseous Oxygen or other strong oxidizing agents (Not for T5500 (open front) acc. to EN 837-1 and information is required by the customer)
6W - Cleaned “free of oil and grease” (no Oxygen service)
MF - Free from Mercury contamination
YF - Cleaned silicone free product

Marking And Tagging #1

DA - Dial marking printed on dial (Information is required by the customer)
NH - Stainless steel tagging wired (Information is required by the customer)
NH1 - Extra lage stainless steel tagging, wired (120 x 30 x 1 mm) (Information is required by the customer)

Material Certificate #1

CD2 - Certificate according to EN 10204 2.2
C3 - Certificate according to EN 10204 3.1
CD5 - Certificate according to NACE for Oilfields MR0175 / ISO 15156-2015 and for Refineries MR0103 / ISO 17945-2015
MQ - Positive material certificate (PMI)

Test Certificate #1

C4 - CD-4 calibration certificate
C43 - CD-4 calibration certificate
CD10 - Calibration certificate 10 points
HY - Hydrostatic pressure test
ML - Mass spectrometer leak test

File Upload #1

Click or drag a file to this area to upload.

Quantity #1 *

T5500 Pressure Gauge #2

Product #2 *

Dial Size #2 *

Model #2 *

Wetted Parts Material #2 *

Case Filling #2 *

Process Connection #2 *

Connection Location #2 *

RANGE #2 *

Engineering Unit #2 *

Additional Options

Accuracy #2

AJ - Special accuracy 0,5 % grade 2A according to ASME B40.100 (Not for ranges < 1 bar (dry) or < 4 bar (liquid filled))

Agency Approval #2

ATEX - ATEX approval (see page 1) (only available with laminated safety glass)
EAC - Custom declaration according Eurasian Conformity (Not in combination with option ATEX)

Case Material #2

YW - Case and ring material stainless steel 316L

Case And Ring #2

BQ - Wall mounting bracket
FF - Front flange on bayonet ring (Not for dial size 160 mm)
FW - Wall mounting flange
FX - Front flange tack welded to case
UF - U-clamp for panel mounting (Not for model T6500)

Connection #2

TU - Throttle plug
WP - No throttle plug in dry or liquid filled cases

Liquid Filling #2

GQ - White oil
GR - Glycerine 99,5%
GV - Silicone
GX - Halocarbon
QC - Low temperature silicone for ambient temperature up to -70°C, includes Flourosilicone sealing (For 100 mm T6500 only)
LJ - Field fillable

Dial Optoins #2

AB - Absolute pressure
CS - Combination range / Dual scale
DN - Dial calibrated at angle other than vertical (Information is required by the customer)
E6 - Dial pin in 6 o ́clock position
ON - Without Ashcroft logo, neutral
PR - Receiver gauge (Information is required by the customer)
SS - Special Scale (Information is required by the customer)
6Y - Skydrol use

Movement #2

LL - PLUS!TM Performance (Not available with Halocarbon filling)
NZ - PLUS!TM Performance silicone free (Not for execution L (liquid filled))
OS - Overload range stop
VS - Underload range stop up to -1 bar
SM - Stainless steel 316L (1.4404) movement

Pointer #2

MP - Adjustable micrometer pointer

Window #2 *

Assembly #2

MO - Instrument assembled to accessory
MO1 - Instrument assembled to diaphragm seal

Cleaning #2

6B - Cleaned for gaseous Oxygen or other strong oxidizing agents (Not for T5500 (open front) acc. to EN 837-1 and information is required by the customer)
6W - Cleaned “free of oil and grease” (no Oxygen service)
MF - Free from Mercury contamination
YF - Cleaned silicone free product

Marking And Tagging #2

DA - Dial marking printed on dial (Information is required by the customer)
NH - Stainless steel tagging wired (Information is required by the customer)
NH1 - Extra lage stainless steel tagging, wired (120 x 30 x 1 mm) (Information is required by the customer)

Material Certificate #2

CD2 - Certificate according to EN 10204 2.2
C3 - Certificate according to EN 10204 3.1
CD5 - Certificate according to NACE for Oilfields MR0175 / ISO 15156-2015 and for Refineries MR0103 / ISO 17945-2015
MQ - Positive material certificate (PMI)

Test Certificate #2

C4 - CD-4 calibration certificate
C43 - CD-4 calibration certificate
CD10 - Calibration certificate 10 points
HY - Hydrostatic pressure test
ML - Mass spectrometer leak test

File Upload #2

Click or drag a file to this area to upload.

Quantity #2 *

T5500 Pressure Gauge #3

Product #3 *

Dial Size #3 *

Model #3 *

Wetted Parts Material #3 *

Case Filling #3 *

Process Connection #3 *

Connection Location #3 *

RANGE #3 *

Engineering Unit #3 *

Additional Options

Accuracy #3

AJ - Special accuracy 0,5 % grade 2A according to ASME B40.100 (Not for ranges < 1 bar (dry) or < 4 bar (liquid filled))

Agency Approval #3

ATEX - ATEX approval (see page 1) (only available with laminated safety glass)
EAC - Custom declaration according Eurasian Conformity (Not in combination with option ATEX)

Case Material #3

YW - Case and ring material stainless steel 316L

Case And Ring #3

BQ - Wall mounting bracket
FF - Front flange on bayonet ring (Not for dial size 160 mm)
FW - Wall mounting flange
FX - Front flange tack welded to case
UF - U-clamp for panel mounting (Not for model T6500)

Connection #3

TU - Throttle plug
WP - No throttle plug in dry or liquid filled cases

Liquid Filling #3

GQ - White oil
GR - Glycerine 99,5%
GV - Silicone
GX - Halocarbon
QC - Low temperature silicone for ambient temperature up to -70°C, includes Flourosilicone sealing (For 100 mm T6500 only)
LJ - Field fillable

Dial Optoins #3

AB - Absolute pressure
CS - Combination range / Dual scale
DN - Dial calibrated at angle other than vertical (Information is required by the customer)
E6 - Dial pin in 6 o ́clock position
ON - Without Ashcroft logo, neutral
PR - Receiver gauge (Information is required by the customer)
SS - Special Scale (Information is required by the customer)
6Y - Skydrol use

Movement #3

LL - PLUS!TM Performance (Not available with Halocarbon filling)
NZ - PLUS!TM Performance silicone free (Not for execution L (liquid filled))
OS - Overload range stop
VS - Underload range stop up to -1 bar
SM - Stainless steel 316L (1.4404) movement

Pointer #3

MP - Adjustable micrometer pointer

Window #3 *

Assembly #3

MO - Instrument assembled to accessory
MO1 - Instrument assembled to diaphragm seal

Cleaning #3

6B - Cleaned for gaseous Oxygen or other strong oxidizing agents (Not for T5500 (open front) acc. to EN 837-1 and information is required by the customer)
6W - Cleaned “free of oil and grease” (no Oxygen service)
MF - Free from Mercury contamination
YF - Cleaned silicone free product

Marking And Tagging #3

DA - Dial marking printed on dial (Information is required by the customer)
NH - Stainless steel tagging wired (Information is required by the customer)
NH1 - Extra lage stainless steel tagging, wired (120 x 30 x 1 mm) (Information is required by the customer)

Material Certificate #3

CD2 - Certificate according to EN 10204 2.2
C3 - Certificate according to EN 10204 3.1
CD5 - Certificate according to NACE for Oilfields MR0175 / ISO 15156-2015 and for Refineries MR0103 / ISO 17945-2015
MQ - Positive material certificate (PMI)

Test Certificate #3

C4 - CD-4 calibration certificate
C43 - CD-4 calibration certificate
CD10 - Calibration certificate 10 points
HY - Hydrostatic pressure test
ML - Mass spectrometer leak test

File Upload #3

Click or drag a file to this area to upload.

Quantity #3 *

T5500 Pressure Gauge #4

Dial Size #4 *

Model #4 *

Wetted Parts Material #4 *

Case Filling #4 *

Process Connection #4 *

Connection Location #4 *

Engineering Unit #4 *

Additional Options

Accuracy #4

AJ - Special accuracy 0,5 % grade 2A according to ASME B40.100 (Not for ranges < 1 bar (dry) or < 4 bar (liquid filled))

Agency Approval #4

ATEX - ATEX approval (see page 1) (only available with laminated safety glass)
EAC - Custom declaration according Eurasian Conformity (Not in combination with option ATEX)

Case Material #4

YW - Case and ring material stainless steel 316L

RANGE #4 *

Case And Ring #4

BQ - Wall mounting bracket
FF - Front flange on bayonet ring (Not for dial size 160 mm)
FW - Wall mounting flange
FX - Front flange tack welded to case
UF - U-clamp for panel mounting (Not for model T6500)

Connection #4

TU - Throttle plug
WP - No throttle plug in dry or liquid filled cases

Liquid Filling #4

GQ - White oil
GR - Glycerine 99,5%
GV - Silicone
GX - Halocarbon
QC - Low temperature silicone for ambient temperature up to -70°C, includes Flourosilicone sealing (For 100 mm T6500 only)
LJ - Field fillable

Dial Options #4

AB - Absolute pressure
CS - Combination range / Dual scale
DN - Dial calibrated at angle other than vertical (Information is required by the customer)
E6 - Dial pin in 6 o ́clock position
ON - Without Ashcroft logo, neutral
PR - Receiver gauge (Information is required by the customer)
SS - Special Scale (Information is required by the customer)
6Y - Skydrol use

Movement #4

LL - PLUS!TM Performance (Not available with Halocarbon filling)
NZ - PLUS!TM Performance silicone free (Not for execution L (liquid filled))
OS - Overload range stop
VS - Underload range stop up to -1 bar
SM - Stainless steel 316L (1.4404) movement

Pointer #4

MP - Adjustable micrometer pointer

Window #4 *

Assembly #4

MO - Instrument assembled to accessory
MO1 - Instrument assembled to diaphragm seal

Cleaning #4

6B - Cleaned for gaseous Oxygen or other strong oxidizing agents (Not for T5500 (open front) acc. to EN 837-1 and information is required by the customer)
6W - Cleaned “free of oil and grease” (no Oxygen service)
MF - Free from Mercury contamination
YF - Cleaned silicone free product

Marking And Tagging #4

DA - Dial marking printed on dial (Information is required by the customer)
NH - Stainless steel tagging wired (Information is required by the customer)
NH1 - Extra lage stainless steel tagging, wired (120 x 30 x 1 mm) (Information is required by the customer)

Material Certificate #4

CD2 - Certificate according to EN 10204 2.2
C3 - Certificate according to EN 10204 3.1
CD5 - Certificate according to NACE for Oilfields MR0175 / ISO 15156-2015 and for Refineries MR0103 / ISO 17945-2015
MQ - Positive material certificate (PMI)

Test Certificate #4

C4 - CD-4 calibration certificate
C43 - CD-4 calibration certificate
CD10 - Calibration certificate 10 points
HY - Hydrostatic pressure test
ML - Mass spectrometer leak test

File Upload #4

Click or drag a file to this area to upload.

Quantity #4 *

T5500 Pressure Gauge #5

Dial Size #5 *

Model #5 *

Wetted Parts Material #5 *

Case Filling #5 *

Process Connection #5 *

Connection Location #5 *

RANGE #5 *

Engineering Unit #5 *

Additional Options

Accuracy #5

AJ - Special accuracy 0,5 % grade 2A according to ASME B40.100 (Not for ranges < 1 bar (dry) or < 4 bar (liquid filled))

Agency Approval #5

ATEX - ATEX approval (see page 1) (only available with laminated safety glass)
EAC - Custom declaration according Eurasian Conformity (Not in combination with option ATEX)

Case Material #5

YW - Case and ring material stainless steel 316L

Case And Ring #5

BQ - Wall mounting bracket
FF - Front flange on bayonet ring (Not for dial size 160 mm)
FW - Wall mounting flange
FX - Front flange tack welded to case
UF - U-clamp for panel mounting (Not for model T6500)

Connection #5

TU - Throttle plug
WP - No throttle plug in dry or liquid filled cases

Liquid Filling #5

GQ - White oil
GR - Glycerine 99,5%
GV - Silicone
GX - Halocarbon
QC - Low temperature silicone for ambient temperature up to -70°C, includes Flourosilicone sealing (For 100 mm T6500 only)
LJ - Field fillable

Dial Options #5

AB - Absolute pressure
CS - Combination range / Dual scale
DN - Dial calibrated at angle other than vertical (Information is required by the customer)
E6 - Dial pin in 6 o ́clock position
ON - Without Ashcroft logo, neutral
PR - Receiver gauge (Information is required by the customer)
SS - Special Scale (Information is required by the customer)
6Y - Skydrol use

Movement #5

LL - PLUS!TM Performance (Not available with Halocarbon filling)
NZ - PLUS!TM Performance silicone free (Not for execution L (liquid filled))
OS - Overload range stop
VS - Underload range stop up to -1 bar
SM - Stainless steel 316L (1.4404) movement

Pointer #5

MP - Adjustable micrometer pointer

Window #5 *

Assembly #5

MO - Instrument assembled to accessory
MO1 - Instrument assembled to diaphragm seal

Cleaning #5

6B - Cleaned for gaseous Oxygen or other strong oxidizing agents (Not for T5500 (open front) acc. to EN 837-1 and information is required by the customer)
6W - Cleaned “free of oil and grease” (no Oxygen service)
MF - Free from Mercury contamination
YF - Cleaned silicone free product

Marking And Tagging #5

DA - Dial marking printed on dial (Information is required by the customer)
NH - Stainless steel tagging wired (Information is required by the customer)
NH1 - Extra lage stainless steel tagging, wired (120 x 30 x 1 mm) (Information is required by the customer)

Material Certificate #5

CD2 - Certificate according to EN 10204 2.2
C3 - Certificate according to EN 10204 3.1
CD5 - Certificate according to NACE for Oilfields MR0175 / ISO 15156-2015 and for Refineries MR0103 / ISO 17945-2015
MQ - Positive material certificate (PMI)

Test Certificate #5

C4 - CD-4 calibration certificate
C43 - CD-4 calibration certificate
CD10 - Calibration certificate 10 points
HY - Hydrostatic pressure test
ML - Mass spectrometer leak test

File Upload #5

Click or drag a file to this area to upload.

Quantity #5 *

B-Series Switches – Pressure, Differential Pressure & Hydraulic #1

Volume

Product #1

Enclosure #1 *

Switch Element Selection - UL/CSA Listed SPDT #1

Switch Element Selection - UL/CSA Listed Dual (2 SPDT) #1

Actuator Seal & Process Temp. #1

B - Buna-N / 0 to 150
V - VitonTM / 20 to 300
T - TeflonTM / 0 to 150
S - 316L / 0 to 300
P - Monel® / 0 to 300

OPTIONAL FEATURES AND ACCESSORIES #1

XBP - Wall Mounting Bracket in. H2O
XCH - Chained Cover
XC8 - CSA Approval
XCN - ATEX Directive 94/9/EC/IECEx Rating
XC4 - Traceable Calibration Certificate
XD2 - Dual Seal Rating (700 Series only)
XFM - FM Approval – Single Element FM Approval – Dual Element
XFP - Fungus Proofing
XFS - Factory Adjusted Setpoint
XG3 - Belleville Actuator
XG5 - UL Limit Control to 150 in. H2O
XG6 - UL Limit Control to 600 psi
XG7 - Secondary Chamber with Vent
XG8 - Steam Limit Control to 300 psi
XG9 - Fire Safe Welded Actuator
XHS - High Static Differential Pressure
XHX - 160 psi (proof) d/p only 100 psi (proof) pressure only (in. H2O)
XJK - Left Conduit Connection
XJL - 3⁄4 ̋ to 1⁄2 ̋ Reducing Bushing
XJM - Metric Electrical Conduit Conn. M20 x 1.5
XK3 - Terminal Block (700 Series only)
XLE - 6 foot Leads on the Micro Switch
XNH - Tagging Stainless Steel
XNN - Paper Tag
XPK - Pilot Light(s) Top Mounted
XPM - 3⁄4 ̋ Sealed Conduit Connection w/16 ̋ Lead Wires
XTA - 316 Stainless Steel Pressure Connection for in. H2O Range
XTM - 2 ̋ Pipe Mounting Bracket
XUD - 316 Stainless Steel Pressure Conn.
X06 - Pressure Connection: 1⁄2 NPT Male, 1⁄4 NPT Female 316 Stainless Steel (Combination)
X07 - 1⁄2 NPTF Press. Conn., 316 SS
X6B - Cleaned for Oxygen Service
X9F - Inches of Water Housing for Outdoor Use
XYW - 316SS Housing
XMD - Metric Range on Label
XRN - Range Scale

RANGE #1 *

File Upload #1

Click or drag a file to this area to upload.

Quantity #1 *

B-Series Switches – Pressure, Differential Pressure & Hydraulic #2

Product #2

Enclosure #2 *

Switch Element Selection - UL/CSA Listed SPDT #2

Switch Element Selection - UL/CSA Listed Dual (2 SPDT) #2

Actuator Seal & Process Temp. #2

B - Buna-N / 0 to 150
V - VitonTM / 20 to 300
T - TeflonTM / 0 to 150
S - 316L / 0 to 300
P - Monel® / 0 to 300

OPTIONAL FEATURES AND ACCESSORIES #2

XBP - Wall Mounting Bracket in. H2O
XCH - Chained Cover
XC8 - CSA Approval
XCN - ATEX Directive 94/9/EC/IECEx Rating
XC4 - Traceable Calibration Certificate
XD2 - Dual Seal Rating (700 Series only)
XFM - FM Approval – Single Element FM Approval – Dual Element
XFP - Fungus Proofing
XFS - Factory Adjusted Setpoint
XG3 - Belleville Actuator
XG5 - UL Limit Control to 150 in. H2O
XG6 - UL Limit Control to 600 psi
XG7 - Secondary Chamber with Vent
XG8 - Steam Limit Control to 300 psi
XG9 - Fire Safe Welded Actuator
XHS - High Static Differential Pressure
XHX - 160 psi (proof) d/p only 100 psi (proof) pressure only (in. H2O)
XJK - Left Conduit Connection
XJL - 3⁄4 ̋ to 1⁄2 ̋ Reducing Bushing
XJM - Metric Electrical Conduit Conn. M20 x 1.5
XK3 - Terminal Block (700 Series only)
XLE - 6 foot Leads on the Micro Switch
XNH - Tagging Stainless Steel
XNN - Paper Tag
XPK - Pilot Light(s) Top Mounted
XPM - 3⁄4 ̋ Sealed Conduit Connection w/16 ̋ Lead Wires
XTA - 316 Stainless Steel Pressure Connection for in. H2O Range
XTM - 2 ̋ Pipe Mounting Bracket
XUD - 316 Stainless Steel Pressure Conn.
X06 - Pressure Connection: 1⁄2 NPT Male, 1⁄4 NPT Female 316 Stainless Steel (Combination)
X07 - 1⁄2 NPTF Press. Conn., 316 SS
X6B - Cleaned for Oxygen Service
X9F - Inches of Water Housing for Outdoor Use
XYW - 316SS Housing
XMD - Metric Range on Label
XRN - Range Scale

RANGE #2 *

File Upload #2

Click or drag a file to this area to upload.

Quantity #2 *

B-Series Switches – Pressure, Differential Pressure & Hydraulic #3

Product #3

Enclosure #3 *

Switch Element Selection - UL/CSA Listed SPDT #3

Switch Element Selection - UL/CSA Listed Dual (2 SPDT) #3

Actuator Seal & Process Temp. #3

B - Buna-N / 0 to 150
V - VitonTM / 20 to 300
T - TeflonTM / 0 to 150
S - 316L / 0 to 300
P - Monel® / 0 to 300

OPTIONAL FEATURES AND ACCESSORIES #3

XBP - Wall Mounting Bracket in. H2O
XCH - Chained Cover
XC8 - CSA Approval
XCN - ATEX Directive 94/9/EC/IECEx Rating
XC4 - Traceable Calibration Certificate
XD2 - Dual Seal Rating (700 Series only)
XFM - FM Approval – Single Element FM Approval – Dual Element
XFP - Fungus Proofing
XFS - Factory Adjusted Setpoint
XG3 - Belleville Actuator
XG5 - UL Limit Control to 150 in. H2O
XG6 - UL Limit Control to 600 psi
XG7 - Secondary Chamber with Vent
XG8 - Steam Limit Control to 300 psi
XG9 - Fire Safe Welded Actuator
XHS - High Static Differential Pressure
XHX - 160 psi (proof) d/p only 100 psi (proof) pressure only (in. H2O)
XJK - Left Conduit Connection
XJL - 3⁄4 ̋ to 1⁄2 ̋ Reducing Bushing
XJM - Metric Electrical Conduit Conn. M20 x 1.5
XK3 - Terminal Block (700 Series only)
XLE - 6 foot Leads on the Micro Switch
XNH - Tagging Stainless Steel
XNN - Paper Tag
XPK - Pilot Light(s) Top Mounted
XPM - 3⁄4 ̋ Sealed Conduit Connection w/16 ̋ Lead Wires
XTA - 316 Stainless Steel Pressure Connection for in. H2O Range
XTM - 2 ̋ Pipe Mounting Bracket
XUD - 316 Stainless Steel Pressure Conn.
X06 - Pressure Connection: 1⁄2 NPT Male, 1⁄4 NPT Female 316 Stainless Steel (Combination)
X07 - 1⁄2 NPTF Press. Conn., 316 SS
X6B - Cleaned for Oxygen Service
X9F - Inches of Water Housing for Outdoor Use
XYW - 316SS Housing
XMD - Metric Range on Label
XRN - Range Scale

RANGE #3 *

File Upload #3

Click or drag a file to this area to upload.

Quantity #3 *

B-Series Switches – Pressure, Differential Pressure & Hydraulic #4

Product #4

Enclosure #4 *

Switch Element Selection - UL/CSA Listed SPDT #4

Switch Element Selection - UL/CSA Listed Dual (2 SPDT) #4

Actuator Seal & Process Temp. #4

B - Buna-N / 0 to 150
V - VitonTM / 20 to 300
T - TeflonTM / 0 to 150
S - 316L / 0 to 300
P - Monel® / 0 to 300

OPTIONAL FEATURES AND ACCESSORIES #4

XBP - Wall Mounting Bracket in. H2O
XCH - Chained Cover
XC8 - CSA Approval
XCN - ATEX Directive 94/9/EC/IECEx Rating
XC4 - Traceable Calibration Certificate
XD2 - Dual Seal Rating (700 Series only)
XFM - FM Approval – Single Element FM Approval – Dual Element
XFP - Fungus Proofing
XFS - Factory Adjusted Setpoint
XG3 - Belleville Actuator
XG5 - UL Limit Control to 150 in. H2O
XG6 - UL Limit Control to 600 psi
XG7 - Secondary Chamber with Vent
XG8 - Steam Limit Control to 300 psi
XG9 - Fire Safe Welded Actuator
XHS - High Static Differential Pressure
XHX - 160 psi (proof) d/p only 100 psi (proof) pressure only (in. H2O)
XJK - Left Conduit Connection
XJL - 3⁄4 ̋ to 1⁄2 ̋ Reducing Bushing
XJM - Metric Electrical Conduit Conn. M20 x 1.5
XK3 - Terminal Block (700 Series only)
XLE - 6 foot Leads on the Micro Switch
XNH - Tagging Stainless Steel
XNN - Paper Tag
XPK - Pilot Light(s) Top Mounted
XPM - 3⁄4 ̋ Sealed Conduit Connection w/16 ̋ Lead Wires
XTA - 316 Stainless Steel Pressure Connection for in. H2O Range
XTM - 2 ̋ Pipe Mounting Bracket
XUD - 316 Stainless Steel Pressure Conn.
X06 - Pressure Connection: 1⁄2 NPT Male, 1⁄4 NPT Female 316 Stainless Steel (Combination)
X07 - 1⁄2 NPTF Press. Conn., 316 SS
X6B - Cleaned for Oxygen Service
X9F - Inches of Water Housing for Outdoor Use
XYW - 316SS Housing
XMD - Metric Range on Label
XRN - Range Scale

RANGE #4 *

File Upload #4

Click or drag a file to this area to upload.

Quantity #4 *

B-Series Switches – Pressure, Differential Pressure & Hydraulic #5

Product #5

Enclosure #5 *

Switch Element Selection - UL/CSA Listed SPDT #5

Switch Element Selection - UL/CSA Listed Dual (2 SPDT) #5

Actuator Seal & Process Temp. #5

B - Buna-N / 0 to 150
V - VitonTM / 20 to 300
T - TeflonTM / 0 to 150
S - 316L / 0 to 300
P - Monel® / 0 to 300

OPTIONAL FEATURES AND ACCESSORIES #5

XBP - Wall Mounting Bracket in. H2O
XCH - Chained Cover
XC8 - CSA Approval
XCN - ATEX Directive 94/9/EC/IECEx Rating
XC4 - Traceable Calibration Certificate
XD2 - Dual Seal Rating (700 Series only)
XFM - FM Approval – Single Element FM Approval – Dual Element
XFP - Fungus Proofing
XFS - Factory Adjusted Setpoint
XG3 - Belleville Actuator
XG5 - UL Limit Control to 150 in. H2O
XG6 - UL Limit Control to 600 psi
XG7 - Secondary Chamber with Vent
XG8 - Steam Limit Control to 300 psi
XG9 - Fire Safe Welded Actuator
XHS - High Static Differential Pressure
XHX - 160 psi (proof) d/p only 100 psi (proof) pressure only (in. H2O)
XJK - Left Conduit Connection
XJL - 3⁄4 ̋ to 1⁄2 ̋ Reducing Bushing
XJM - Metric Electrical Conduit Conn. M20 x 1.5
XK3 - Terminal Block (700 Series only)
XLE - 6 foot Leads on the Micro Switch
XNH - Tagging Stainless Steel
XNN - Paper Tag
XPK - Pilot Light(s) Top Mounted
XPM - 3⁄4 ̋ Sealed Conduit Connection w/16 ̋ Lead Wires
XTA - 316 Stainless Steel Pressure Connection for in. H2O Range
XTM - 2 ̋ Pipe Mounting Bracket
XUD - 316 Stainless Steel Pressure Conn.
X06 - Pressure Connection: 1⁄2 NPT Male, 1⁄4 NPT Female 316 Stainless Steel (Combination)
X07 - 1⁄2 NPTF Press. Conn., 316 SS
X6B - Cleaned for Oxygen Service
X9F - Inches of Water Housing for Outdoor Use
XYW - 316SS Housing
XMD - Metric Range on Label
XRN - Range Scale

RANGE #5 *

File Upload #5

Click or drag a file to this area to upload.

Quantity #5 *

Sales detail

QT Date *

Sales Name *

Note

Status

Requirements

Customer detail

Product

T5500 Pressure Gauge #1

Additional Options

T5500 Pressure Gauge #2

Additional Options

T5500 Pressure Gauge #3

Additional Options

T5500 Pressure Gauge #4

Additional Options

T5500 Pressure Gauge #5

Additional Options

B-Series Switches – Pressure, Differential Pressure & Hydraulic #1

B-Series Switches – Pressure, Differential Pressure & Hydraulic #2

B-Series Switches – Pressure, Differential Pressure & Hydraulic #3

B-Series Switches – Pressure, Differential Pressure & Hydraulic #4

B-Series Switches – Pressure, Differential Pressure & Hydraulic #5

Sales detail

Rayong Branch